D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
usr
/
include
/
linux
/
Filename :
timex.h
back
Copy
/***************************************************************************** * * * Copyright (c) David L. Mills 1993 * * * * Permission to use, copy, modify, and distribute this software and its * * documentation for any purpose and without fee is hereby granted, provided * * that the above copyright notice appears in all copies and that both the * * copyright notice and this permission notice appear in supporting * * documentation, and that the name University of Delaware not be used in * * advertising or publicity pertaining to distribution of the software * * without specific, written prior permission. The University of Delaware * * makes no representations about the suitability this software for any * * purpose. It is provided "as is" without express or implied warranty. * * * *****************************************************************************/ /* * Modification history timex.h * * 29 Dec 97 Russell King * Moved CLOCK_TICK_RATE, CLOCK_TICK_FACTOR and FINETUNE to asm/timex.h * for ARM machines * * 9 Jan 97 Adrian Sun * Shifted LATCH define to allow access to alpha machines. * * 26 Sep 94 David L. Mills * Added defines for hybrid phase/frequency-lock loop. * * 19 Mar 94 David L. Mills * Moved defines from kernel routines to header file and added new * defines for PPS phase-lock loop. * * 20 Feb 94 David L. Mills * Revised status codes and structures for external clock and PPS * signal discipline. * * 28 Nov 93 David L. Mills * Adjusted parameters to improve stability and increase poll * interval. * * 17 Sep 93 David L. Mills * Created file $NTP/include/sys/timex.h * 07 Oct 93 Torsten Duwe * Derived linux/timex.h * 1995-08-13 Torsten Duwe * kernel PLL updated to 1994-12-13 specs (rfc-1589) * 1997-08-30 Ulrich Windl * Added new constant NTP_PHASE_LIMIT * 2004-08-12 Christoph Lameter * Reworked time interpolation logic */ #ifndef _LINUX_TIMEX_H #define _LINUX_TIMEX_H #include <linux/time.h> #define NTP_API 4 /* NTP API version */ /* * syscall interface - used (mainly by NTP daemon) * to discipline kernel clock oscillator */ struct timex { unsigned int modes; /* mode selector */ __kernel_long_t offset; /* time offset (usec) */ __kernel_long_t freq; /* frequency offset (scaled ppm) */ __kernel_long_t maxerror;/* maximum error (usec) */ __kernel_long_t esterror;/* estimated error (usec) */ int status; /* clock command/status */ __kernel_long_t constant;/* pll time constant */ __kernel_long_t precision;/* clock precision (usec) (read only) */ __kernel_long_t tolerance;/* clock frequency tolerance (ppm) * (read only) */ struct timeval time; /* (read only, except for ADJ_SETOFFSET) */ __kernel_long_t tick; /* (modified) usecs between clock ticks */ __kernel_long_t ppsfreq;/* pps frequency (scaled ppm) (ro) */ __kernel_long_t jitter; /* pps jitter (us) (ro) */ int shift; /* interval duration (s) (shift) (ro) */ __kernel_long_t stabil; /* pps stability (scaled ppm) (ro) */ __kernel_long_t jitcnt; /* jitter limit exceeded (ro) */ __kernel_long_t calcnt; /* calibration intervals (ro) */ __kernel_long_t errcnt; /* calibration errors (ro) */ __kernel_long_t stbcnt; /* stability limit exceeded (ro) */ int tai; /* TAI offset (ro) */ int :32; int :32; int :32; int :32; int :32; int :32; int :32; int :32; int :32; int :32; int :32; }; /* * Mode codes (timex.mode) */ #define ADJ_OFFSET 0x0001 /* time offset */ #define ADJ_FREQUENCY 0x0002 /* frequency offset */ #define ADJ_MAXERROR 0x0004 /* maximum time error */ #define ADJ_ESTERROR 0x0008 /* estimated time error */ #define ADJ_STATUS 0x0010 /* clock status */ #define ADJ_TIMECONST 0x0020 /* pll time constant */ #define ADJ_TAI 0x0080 /* set TAI offset */ #define ADJ_SETOFFSET 0x0100 /* add 'time' to current time */ #define ADJ_MICRO 0x1000 /* select microsecond resolution */ #define ADJ_NANO 0x2000 /* select nanosecond resolution */ #define ADJ_TICK 0x4000 /* tick value */ #define ADJ_OFFSET_SINGLESHOT 0x8001 /* old-fashioned adjtime */ #define ADJ_OFFSET_SS_READ 0xa001 /* read-only adjtime */ /* NTP userland likes the MOD_ prefix better */ #define MOD_OFFSET ADJ_OFFSET #define MOD_FREQUENCY ADJ_FREQUENCY #define MOD_MAXERROR ADJ_MAXERROR #define MOD_ESTERROR ADJ_ESTERROR #define MOD_STATUS ADJ_STATUS #define MOD_TIMECONST ADJ_TIMECONST #define MOD_TAI ADJ_TAI #define MOD_MICRO ADJ_MICRO #define MOD_NANO ADJ_NANO /* * Status codes (timex.status) */ #define STA_PLL 0x0001 /* enable PLL updates (rw) */ #define STA_PPSFREQ 0x0002 /* enable PPS freq discipline (rw) */ #define STA_PPSTIME 0x0004 /* enable PPS time discipline (rw) */ #define STA_FLL 0x0008 /* select frequency-lock mode (rw) */ #define STA_INS 0x0010 /* insert leap (rw) */ #define STA_DEL 0x0020 /* delete leap (rw) */ #define STA_UNSYNC 0x0040 /* clock unsynchronized (rw) */ #define STA_FREQHOLD 0x0080 /* hold frequency (rw) */ #define STA_PPSSIGNAL 0x0100 /* PPS signal present (ro) */ #define STA_PPSJITTER 0x0200 /* PPS signal jitter exceeded (ro) */ #define STA_PPSWANDER 0x0400 /* PPS signal wander exceeded (ro) */ #define STA_PPSERROR 0x0800 /* PPS signal calibration error (ro) */ #define STA_CLOCKERR 0x1000 /* clock hardware fault (ro) */ #define STA_NANO 0x2000 /* resolution (0 = us, 1 = ns) (ro) */ #define STA_MODE 0x4000 /* mode (0 = PLL, 1 = FLL) (ro) */ #define STA_CLK 0x8000 /* clock source (0 = A, 1 = B) (ro) */ /* read-only bits */ #define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \ STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK) /* * Clock states (time_state) */ #define TIME_OK 0 /* clock synchronized, no leap second */ #define TIME_INS 1 /* insert leap second */ #define TIME_DEL 2 /* delete leap second */ #define TIME_OOP 3 /* leap second in progress */ #define TIME_WAIT 4 /* leap second has occurred */ #define TIME_ERROR 5 /* clock not synchronized */ #define TIME_BAD TIME_ERROR /* bw compat */ #endif /* _LINUX_TIMEX_H */