D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
proc
/
thread-self
/
root
/
proc
/
thread-self
/
root
/
usr
/
include
/
bind9
/
isc
/
Filename :
entropy.h
back
Copy
/* * Copyright (C) Internet Systems Consortium, Inc. ("ISC") * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, you can obtain one at https://mozilla.org/MPL/2.0/. * * See the COPYRIGHT file distributed with this work for additional * information regarding copyright ownership. */ #ifndef ISC_ENTROPY_H #define ISC_ENTROPY_H 1 /***** ***** Module Info *****/ /*! \file isc/entropy.h * \brief The entropy API * * \li MP: * The entropy object is locked internally. All callbacks into * application-provided functions (for setup, gathering, and * shutdown of sources) are guaranteed to be called with the * entropy API lock held. This means these functions are * not permitted to call back into the entropy API. * * \li Reliability: * No anticipated impact. * * \li Resources: * A buffer, used as an entropy pool. * * \li Security: * While this code is believed to implement good entropy gathering * and distribution, it has not been reviewed by a cryptographic * expert. * Since the added entropy is only as good as the sources used, * this module could hand out bad data and never know it. * * \li Standards: * None. */ /*** *** Imports ***/ #include <stdbool.h> #include <stdio.h> #include <isc/lang.h> #include <isc/types.h> /*@{*/ /*% Entropy callback function. */ typedef isc_result_t (*isc_entropystart_t)(isc_entropysource_t *source, void *arg, bool blocking); typedef isc_result_t (*isc_entropyget_t)(isc_entropysource_t *source, void *arg, bool blocking); typedef void (*isc_entropystop_t)(isc_entropysource_t *source, void *arg); /*@}*/ /*** *** Flags. ***/ /*! * \brief * Extract only "good" data; return failure if there is not enough * data available and there are no sources which we can poll to get * data, or those sources are empty. * * */ #define ISC_ENTROPY_GOODONLY 0x00000001U /*! * \brief * Extract as much good data as possible, but if there isn't enough * at hand, return what is available. This flag only makes sense * when used with _GOODONLY. */ #define ISC_ENTROPY_PARTIAL 0x00000002U /*! * \brief * Block the task until data is available. This is contrary to the * ISC task system, where tasks should never block. However, if * this is a special purpose application where blocking a task is * acceptable (say, an offline zone signer) this flag may be set. * This flag only makes sense when used with _GOODONLY, and will * block regardless of the setting for _PARTIAL. */ #define ISC_ENTROPY_BLOCKING 0x00000004U /*! * \brief * Estimate the amount of entropy contained in the sample pool. * If this is not set, the source will be gathered and periodically * mixed into the entropy pool, but no increment in contained entropy * will be assumed. This flag only makes sense on sample sources. */ #define ISC_ENTROPYSOURCE_ESTIMATE 0x00000001U /* * For use with isc_entropy_usebestsource(). */ /*! * \brief * Use the keyboard as the only entropy source. */ #define ISC_ENTROPY_KEYBOARDYES 1 /*! * \brief * Never use the keyboard as an entropy source. */ #define ISC_ENTROPY_KEYBOARDNO 2 /*! * \brief * Use the keyboard as an entropy source only if opening the * random device fails. */ #define ISC_ENTROPY_KEYBOARDMAYBE 3 ISC_LANG_BEGINDECLS /*** *** Functions ***/ isc_result_t isc_entropy_create(isc_mem_t *mctx, isc_entropy_t **entp); /*!< * \brief Create a new entropy object. */ void isc_entropy_attach(isc_entropy_t *ent, isc_entropy_t **entp); /*!< * Attaches to an entropy object. */ void isc_entropy_detach(isc_entropy_t **entp); /*!< * \brief Detaches from an entropy object. */ isc_result_t isc_entropy_createfilesource(isc_entropy_t *ent, const char *fname); /*!< * \brief Create a new entropy source from a file. * * The file is assumed to contain good randomness, and will be mixed directly * into the pool with every byte adding 8 bits of entropy. * * The file will be put into non-blocking mode, so it may be a device file, * such as /dev/random. /dev/urandom should not be used here if it can * be avoided, since it will always provide data even if it isn't good. * We will make as much pseudorandom data as we need internally if our * caller asks for it. * * If we hit end-of-file, we will stop reading from this source. Callers * who require strong random data will get failure when our pool drains. * The file will never be opened/read again once EOF is reached. */ void isc_entropy_destroysource(isc_entropysource_t **sourcep); /*!< * \brief Removes an entropy source from the entropy system. */ isc_result_t isc_entropy_createsamplesource(isc_entropy_t *ent, isc_entropysource_t **sourcep); /*!< * \brief Create an entropy source that consists of samples. Each sample is * added to the source via isc_entropy_addsamples(), below. */ isc_result_t isc_entropy_createcallbacksource(isc_entropy_t *ent, isc_entropystart_t start, isc_entropyget_t get, isc_entropystop_t stop, void *arg, isc_entropysource_t **sourcep); /*!< * \brief Create an entropy source that is polled via a callback. * * This would be used when keyboard input is used, or a GUI input method. * It can also be used to hook in any external entropy source. * * Samples are added via isc_entropy_addcallbacksample(), below. * _addcallbacksample() is the only function which may be called from * within an entropy API callback function. */ void isc_entropy_stopcallbacksources(isc_entropy_t *ent); /*!< * \brief Call the stop functions for callback sources that have had their * start functions called. */ /*@{*/ isc_result_t isc_entropy_addcallbacksample(isc_entropysource_t *source, uint32_t sample, uint32_t extra); isc_result_t isc_entropy_addsample(isc_entropysource_t *source, uint32_t sample, uint32_t extra); /*!< * \brief Add a sample to the sample source. * * The sample MUST be a timestamp * that increases over time, with the exception of wrap-around for * extremely high resolution timers which will quickly wrap-around * a 32-bit integer. * * The "extra" parameter is used only to add a bit more unpredictable * data. It is not used other than included in the hash of samples. * * When in an entropy API callback function, _addcallbacksource() must be * used. At all other times, _addsample() must be used. */ /*@}*/ isc_result_t isc_entropy_getdata(isc_entropy_t *ent, void *data, unsigned int length, unsigned int *returned, unsigned int flags); /*!< * \brief Get random data from entropy pool 'ent'. * * If a hook has been set up using isc_entropy_sethook() and * isc_entropy_usehook(), then the hook function will be called to get * random data. * * Otherwise, randomness is extracted from the entropy pool set up in BIND. * This may cause the pool to be loaded from various sources. Ths is done * by stirring the pool and returning a part of hash as randomness. * (Note that no secrets are given away here since parts of the hash are * XORed together before returning.) * * 'flags' may contain ISC_ENTROPY_GOODONLY, ISC_ENTROPY_PARTIAL, or * ISC_ENTROPY_BLOCKING. These will be honored if the hook function is * not in use. If it is, the flags will be passed to the hook function * but it may ignore them. * * Up to 'length' bytes of randomness are retrieved and copied into 'data'. * (If 'returned' is not NULL, and the number of bytes copied is less than * 'length' - which may happen if ISC_ENTROPY_PARTIAL was used - then the * number of bytes copied will be stored in *returned.) * * Returns: * \li ISC_R_SUCCESS on success * \li ISC_R_NOENTROPY if entropy pool is empty * \li other error codes are possible when a hook is in use */ void isc_entropy_putdata(isc_entropy_t *ent, void *data, unsigned int length, uint32_t entropy); /*!< * \brief Add "length" bytes in "data" to the entropy pool, incrementing the * pool's entropy count by "entropy." * * These bytes will prime the pseudorandom portion even if no entropy is * actually added. */ void isc_entropy_stats(isc_entropy_t *ent, FILE *out); /*!< * \brief Dump some (trivial) stats to the stdio stream "out". */ unsigned int isc_entropy_status(isc_entropy_t *end); /* * Returns the number of bits the pool currently contains. This is just * an estimate. */ isc_result_t isc_entropy_usebestsource(isc_entropy_t *ectx, isc_entropysource_t **source, const char *randomfile, int use_keyboard); /*!< * \brief Use whatever source of entropy is best. * * Notes: *\li If "randomfile" is not NULL, open it with * isc_entropy_createfilesource(). * *\li If "randomfile" is NULL and the system's random device was detected * when the program was configured and built, open that device with * isc_entropy_createfilesource(). * *\li If "use_keyboard" is #ISC_ENTROPY_KEYBOARDYES, then always open * the keyboard as an entropy source (possibly in addition to * "randomfile" or the random device). * *\li If "use_keyboard" is #ISC_ENTROPY_KEYBOARDMAYBE, open the keyboard only * if opening the random file/device fails. A message will be * printed describing the need for keyboard input. * *\li If "use_keyboard" is #ISC_ENTROPY_KEYBOARDNO, the keyboard will * never be opened. * * Returns: *\li #ISC_R_SUCCESS if at least one source of entropy could be started. * *\li #ISC_R_NOENTROPY if use_keyboard is #ISC_ENTROPY_KEYBOARDNO and * there is no random device pathname compiled into the program. * *\li A return code from isc_entropy_createfilesource() or * isc_entropy_createcallbacksource(). */ void isc_entropy_usehook(isc_entropy_t *ectx, bool onoff); /*!< * \brief Configure entropy context 'ectx' to use the hook function * * Sets the entropy context to call the hook function for random number * generation, if such a function has been configured via * isc_entropy_sethook(), whenever isc_entropy_getdata() is called. */ void isc_entropy_sethook(isc_entropy_getdata_t myhook); /*!< * \brief Set the hook function. * * The hook function is a global value: only one hook function * can be set in the system. Individual entropy contexts may be * configured to use it, or not, by calling isc_entropy_usehook(). */ ISC_LANG_ENDDECLS #endif /* ISC_ENTROPY_H */