D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
proc
/
self
/
root
/
opt
/
alt
/
ruby27
/
share
/
ruby
/
openssl
/
Filename :
config.rb
back
Copy
# frozen_string_literal: false =begin = Ruby-space definitions that completes C-space funcs for Config = Info Copyright (C) 2010 Hiroshi Nakamura <nahi@ruby-lang.org> = Licence This program is licensed under the same licence as Ruby. (See the file 'LICENCE'.) =end require 'stringio' module OpenSSL ## # = OpenSSL::Config # # Configuration for the openssl library. # # Many system's installation of openssl library will depend on your system # configuration. See the value of OpenSSL::Config::DEFAULT_CONFIG_FILE for # the location of the file for your host. # # See also http://www.openssl.org/docs/apps/config.html class Config include Enumerable class << self ## # Parses a given _string_ as a blob that contains configuration for # OpenSSL. # # If the source of the IO is a file, then consider using #parse_config. def parse(string) c = new() parse_config(StringIO.new(string)).each do |section, hash| c[section] = hash end c end ## # load is an alias to ::new alias load new ## # Parses the configuration data read from _io_, see also #parse. # # Raises a ConfigError on invalid configuration data. def parse_config(io) begin parse_config_lines(io) rescue ConfigError => e e.message.replace("error in line #{io.lineno}: " + e.message) raise end end def get_key_string(data, section, key) # :nodoc: if v = data[section] && data[section][key] return v elsif section == 'ENV' if v = ENV[key] return v end end if v = data['default'] && data['default'][key] return v end end private def parse_config_lines(io) section = 'default' data = {section => {}} io_stack = [io] while definition = get_definition(io_stack) definition = clear_comments(definition) next if definition.empty? case definition when /\A\[/ if /\[([^\]]*)\]/ =~ definition section = $1.strip data[section] ||= {} else raise ConfigError, "missing close square bracket" end when /\A\.include (\s*=\s*)?(.+)\z/ path = $2 if File.directory?(path) files = Dir.glob(File.join(path, "*.{cnf,conf}"), File::FNM_EXTGLOB) else files = [path] end files.each do |filename| begin io_stack << StringIO.new(File.read(filename)) rescue raise ConfigError, "could not include file '%s'" % filename end end when /\A([^:\s]*)(?:::([^:\s]*))?\s*=(.*)\z/ if $2 section = $1 key = $2 else key = $1 end value = unescape_value(data, section, $3) (data[section] ||= {})[key] = value.strip else raise ConfigError, "missing equal sign" end end data end # escape with backslash QUOTE_REGEXP_SQ = /\A([^'\\]*(?:\\.[^'\\]*)*)'/ # escape with backslash and doubled dq QUOTE_REGEXP_DQ = /\A([^"\\]*(?:""[^"\\]*|\\.[^"\\]*)*)"/ # escaped char map ESCAPE_MAP = { "r" => "\r", "n" => "\n", "b" => "\b", "t" => "\t", } def unescape_value(data, section, value) scanned = [] while m = value.match(/['"\\$]/) scanned << m.pre_match c = m[0] value = m.post_match case c when "'" if m = value.match(QUOTE_REGEXP_SQ) scanned << m[1].gsub(/\\(.)/, '\\1') value = m.post_match else break end when '"' if m = value.match(QUOTE_REGEXP_DQ) scanned << m[1].gsub(/""/, '').gsub(/\\(.)/, '\\1') value = m.post_match else break end when "\\" c = value.slice!(0, 1) scanned << (ESCAPE_MAP[c] || c) when "$" ref, value = extract_reference(value) refsec = section if ref.index('::') refsec, ref = ref.split('::', 2) end if v = get_key_string(data, refsec, ref) scanned << v else raise ConfigError, "variable has no value" end else raise 'must not reaced' end end scanned << value scanned.join end def extract_reference(value) rest = '' if m = value.match(/\(([^)]*)\)|\{([^}]*)\}/) value = m[1] || m[2] rest = m.post_match elsif [?(, ?{].include?(value[0]) raise ConfigError, "no close brace" end if m = value.match(/[a-zA-Z0-9_]*(?:::[a-zA-Z0-9_]*)?/) return m[0], m.post_match + rest else raise end end def clear_comments(line) # FCOMMENT if m = line.match(/\A([\t\n\f ]*);.*\z/) return m[1] end # COMMENT scanned = [] while m = line.match(/[#'"\\]/) scanned << m.pre_match c = m[0] line = m.post_match case c when '#' line = nil break when "'", '"' regexp = (c == "'") ? QUOTE_REGEXP_SQ : QUOTE_REGEXP_DQ scanned << c if m = line.match(regexp) scanned << m[0] line = m.post_match else scanned << line line = nil break end when "\\" scanned << c scanned << line.slice!(0, 1) else raise 'must not reaced' end end scanned << line scanned.join end def get_definition(io_stack) if line = get_line(io_stack) while /[^\\]\\\z/ =~ line if extra = get_line(io_stack) line += extra else break end end return line.strip end end def get_line(io_stack) while io = io_stack.last if line = io.gets return line.gsub(/[\r\n]*/, '') end io_stack.pop end end end ## # Creates an instance of OpenSSL's configuration class. # # This can be used in contexts like OpenSSL::X509::ExtensionFactory.config= # # If the optional _filename_ parameter is provided, then it is read in and # parsed via #parse_config. # # This can raise IO exceptions based on the access, or availability of the # file. A ConfigError exception may be raised depending on the validity of # the data being configured. # def initialize(filename = nil) @data = {} if filename File.open(filename.to_s) do |file| Config.parse_config(file).each do |section, hash| self[section] = hash end end end end ## # Gets the value of _key_ from the given _section_ # # Given the following configurating file being loaded: # # config = OpenSSL::Config.load('foo.cnf') # #=> #<OpenSSL::Config sections=["default"]> # puts config.to_s # #=> [ default ] # # foo=bar # # You can get a specific value from the config if you know the _section_ # and _key_ like so: # # config.get_value('default','foo') # #=> "bar" # def get_value(section, key) if section.nil? raise TypeError.new('nil not allowed') end section = 'default' if section.empty? get_key_string(section, key) end ## # # *Deprecated* # # Use #get_value instead def value(arg1, arg2 = nil) # :nodoc: warn('Config#value is deprecated; use Config#get_value') if arg2.nil? section, key = 'default', arg1 else section, key = arg1, arg2 end section ||= 'default' section = 'default' if section.empty? get_key_string(section, key) end ## # Set the target _key_ with a given _value_ under a specific _section_. # # Given the following configurating file being loaded: # # config = OpenSSL::Config.load('foo.cnf') # #=> #<OpenSSL::Config sections=["default"]> # puts config.to_s # #=> [ default ] # # foo=bar # # You can set the value of _foo_ under the _default_ section to a new # value: # # config.add_value('default', 'foo', 'buzz') # #=> "buzz" # puts config.to_s # #=> [ default ] # # foo=buzz # def add_value(section, key, value) check_modify (@data[section] ||= {})[key] = value end ## # Get a specific _section_ from the current configuration # # Given the following configurating file being loaded: # # config = OpenSSL::Config.load('foo.cnf') # #=> #<OpenSSL::Config sections=["default"]> # puts config.to_s # #=> [ default ] # # foo=bar # # You can get a hash of the specific section like so: # # config['default'] # #=> {"foo"=>"bar"} # def [](section) @data[section] || {} end ## # Deprecated # # Use #[] instead def section(name) # :nodoc: warn('Config#section is deprecated; use Config#[]') @data[name] || {} end ## # Sets a specific _section_ name with a Hash _pairs_. # # Given the following configuration being created: # # config = OpenSSL::Config.new # #=> #<OpenSSL::Config sections=[]> # config['default'] = {"foo"=>"bar","baz"=>"buz"} # #=> {"foo"=>"bar", "baz"=>"buz"} # puts config.to_s # #=> [ default ] # # foo=bar # # baz=buz # # It's important to note that this will essentially merge any of the keys # in _pairs_ with the existing _section_. For example: # # config['default'] # #=> {"foo"=>"bar", "baz"=>"buz"} # config['default'] = {"foo" => "changed"} # #=> {"foo"=>"changed"} # config['default'] # #=> {"foo"=>"changed", "baz"=>"buz"} # def []=(section, pairs) check_modify @data[section] ||= {} pairs.each do |key, value| self.add_value(section, key, value) end end ## # Get the names of all sections in the current configuration def sections @data.keys end ## # Get the parsable form of the current configuration # # Given the following configuration being created: # # config = OpenSSL::Config.new # #=> #<OpenSSL::Config sections=[]> # config['default'] = {"foo"=>"bar","baz"=>"buz"} # #=> {"foo"=>"bar", "baz"=>"buz"} # puts config.to_s # #=> [ default ] # # foo=bar # # baz=buz # # You can parse get the serialized configuration using #to_s and then parse # it later: # # serialized_config = config.to_s # # much later... # new_config = OpenSSL::Config.parse(serialized_config) # #=> #<OpenSSL::Config sections=["default"]> # puts new_config # #=> [ default ] # foo=bar # baz=buz # def to_s ary = [] @data.keys.sort.each do |section| ary << "[ #{section} ]\n" @data[section].keys.each do |key| ary << "#{key}=#{@data[section][key]}\n" end ary << "\n" end ary.join end ## # For a block. # # Receive the section and its pairs for the current configuration. # # config.each do |section, key, value| # # ... # end # def each @data.each do |section, hash| hash.each do |key, value| yield [section, key, value] end end end ## # String representation of this configuration object, including the class # name and its sections. def inspect "#<#{self.class.name} sections=#{sections.inspect}>" end protected def data # :nodoc: @data end private def initialize_copy(other) @data = other.data.dup end def check_modify raise TypeError.new("Insecure: can't modify OpenSSL config") if frozen? end def get_key_string(section, key) Config.get_key_string(@data, section, key) end end end