D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
opt
/
alt
/
ruby26
/
lib64
/
ruby
/
2.6.0
/
Filename :
time.rb
back
Copy
# frozen_string_literal: true require 'date' # :stopdoc: # = time.rb # # When 'time' is required, Time is extended with additional methods for parsing # and converting Times. # # == Features # # This library extends the Time class with the following conversions between # date strings and Time objects: # # * date-time defined by {RFC 2822}[http://www.ietf.org/rfc/rfc2822.txt] # * HTTP-date defined by {RFC 2616}[http://www.ietf.org/rfc/rfc2616.txt] # * dateTime defined by XML Schema Part 2: Datatypes ({ISO # 8601}[http://www.iso.org/iso/date_and_time_format]) # * various formats handled by Date._parse # * custom formats handled by Date._strptime # :startdoc: class Time class << Time # # A hash of timezones mapped to hour differences from UTC. The # set of time zones corresponds to the ones specified by RFC 2822 # and ISO 8601. # ZoneOffset = { # :nodoc: 'UTC' => 0, # ISO 8601 'Z' => 0, # RFC 822 'UT' => 0, 'GMT' => 0, 'EST' => -5, 'EDT' => -4, 'CST' => -6, 'CDT' => -5, 'MST' => -7, 'MDT' => -6, 'PST' => -8, 'PDT' => -7, # Following definition of military zones is original one. # See RFC 1123 and RFC 2822 for the error in RFC 822. 'A' => +1, 'B' => +2, 'C' => +3, 'D' => +4, 'E' => +5, 'F' => +6, 'G' => +7, 'H' => +8, 'I' => +9, 'K' => +10, 'L' => +11, 'M' => +12, 'N' => -1, 'O' => -2, 'P' => -3, 'Q' => -4, 'R' => -5, 'S' => -6, 'T' => -7, 'U' => -8, 'V' => -9, 'W' => -10, 'X' => -11, 'Y' => -12, } # # Return the number of seconds the specified time zone differs # from UTC. # # Numeric time zones that include minutes, such as # <code>-10:00</code> or <code>+1330</code> will work, as will # simpler hour-only time zones like <code>-10</code> or # <code>+13</code>. # # Textual time zones listed in ZoneOffset are also supported. # # If the time zone does not match any of the above, +zone_offset+ # will check if the local time zone (both with and without # potential Daylight Saving \Time changes being in effect) matches # +zone+. Specifying a value for +year+ will change the year used # to find the local time zone. # # If +zone_offset+ is unable to determine the offset, nil will be # returned. # # require 'time' # # Time.zone_offset("EST") #=> -18000 # # You must require 'time' to use this method. # def zone_offset(zone, year=self.now.year) off = nil zone = zone.upcase if /\A([+-])(\d\d)(:?)(\d\d)(?:\3(\d\d))?\z/ =~ zone off = ($1 == '-' ? -1 : 1) * (($2.to_i * 60 + $4.to_i) * 60 + $5.to_i) elsif zone.match?(/\A[+-]\d\d\z/) off = zone.to_i * 3600 elsif ZoneOffset.include?(zone) off = ZoneOffset[zone] * 3600 elsif ((t = self.local(year, 1, 1)).zone.upcase == zone rescue false) off = t.utc_offset elsif ((t = self.local(year, 7, 1)).zone.upcase == zone rescue false) off = t.utc_offset end off end def zone_utc?(zone) # * +0000 # In RFC 2822, +0000 indicate a time zone at Universal Time. # Europe/Lisbon is "a time zone at Universal Time" in Winter. # Atlantic/Reykjavik is "a time zone at Universal Time". # Africa/Dakar is "a time zone at Universal Time". # So +0000 is a local time such as Europe/London, etc. # * GMT # GMT is used as a time zone abbreviation in Europe/London, # Africa/Dakar, etc. # So it is a local time. # # * -0000, -00:00 # In RFC 2822, -0000 the date-time contains no information about the # local time zone. # In RFC 3339, -00:00 is used for the time in UTC is known, # but the offset to local time is unknown. # They are not appropriate for specific time zone such as # Europe/London because time zone neutral, # So -00:00 and -0000 are treated as UTC. zone.match?(/\A(?:-00:00|-0000|-00|UTC|Z|UT)\z/i) end private :zone_utc? def force_zone!(t, zone, offset=nil) if zone_utc?(zone) t.utc elsif offset ||= zone_offset(zone) # Prefer the local timezone over the fixed offset timezone because # the former is a real timezone and latter is an artificial timezone. t.localtime if t.utc_offset != offset # Use the fixed offset timezone only if the local timezone cannot # represent the given offset. t.localtime(offset) end else t.localtime end end private :force_zone! LeapYearMonthDays = [31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31] # :nodoc: CommonYearMonthDays = [31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31] # :nodoc: def month_days(y, m) if ((y % 4 == 0) && (y % 100 != 0)) || (y % 400 == 0) LeapYearMonthDays[m-1] else CommonYearMonthDays[m-1] end end private :month_days def apply_offset(year, mon, day, hour, min, sec, off) if off < 0 off = -off off, o = off.divmod(60) if o != 0 then sec += o; o, sec = sec.divmod(60); off += o end off, o = off.divmod(60) if o != 0 then min += o; o, min = min.divmod(60); off += o end off, o = off.divmod(24) if o != 0 then hour += o; o, hour = hour.divmod(24); off += o end if off != 0 day += off days = month_days(year, mon) if days and days < day mon += 1 if 12 < mon mon = 1 year += 1 end day = 1 end end elsif 0 < off off, o = off.divmod(60) if o != 0 then sec -= o; o, sec = sec.divmod(60); off -= o end off, o = off.divmod(60) if o != 0 then min -= o; o, min = min.divmod(60); off -= o end off, o = off.divmod(24) if o != 0 then hour -= o; o, hour = hour.divmod(24); off -= o end if off != 0 then day -= off if day < 1 mon -= 1 if mon < 1 year -= 1 mon = 12 end day = month_days(year, mon) end end end return year, mon, day, hour, min, sec end private :apply_offset def make_time(date, year, yday, mon, day, hour, min, sec, sec_fraction, zone, now) if !year && !yday && !mon && !day && !hour && !min && !sec && !sec_fraction raise ArgumentError, "no time information in #{date.inspect}" end off = nil if year || now off_year = year || now.year off = zone_offset(zone, off_year) if zone end if yday unless (1..366) === yday raise ArgumentError, "yday #{yday} out of range" end mon, day = (yday-1).divmod(31) mon += 1 day += 1 t = make_time(date, year, nil, mon, day, hour, min, sec, sec_fraction, zone, now) diff = yday - t.yday return t if diff.zero? day += diff if day > 28 and day > (mday = month_days(off_year, mon)) if (mon += 1) > 12 raise ArgumentError, "yday #{yday} out of range" end day -= mday end return make_time(date, year, nil, mon, day, hour, min, sec, sec_fraction, zone, now) end if now and now.respond_to?(:getlocal) if off now = now.getlocal(off) if now.utc_offset != off else now = now.getlocal end end usec = nil usec = sec_fraction * 1000000 if sec_fraction if now begin break if year; year = now.year break if mon; mon = now.mon break if day; day = now.day break if hour; hour = now.hour break if min; min = now.min break if sec; sec = now.sec break if sec_fraction; usec = now.tv_usec end until true end year ||= 1970 mon ||= 1 day ||= 1 hour ||= 0 min ||= 0 sec ||= 0 usec ||= 0 if year != off_year off = nil off = zone_offset(zone, year) if zone end if off year, mon, day, hour, min, sec = apply_offset(year, mon, day, hour, min, sec, off) t = self.utc(year, mon, day, hour, min, sec, usec) force_zone!(t, zone, off) t else self.local(year, mon, day, hour, min, sec, usec) end end private :make_time # # Takes a string representation of a Time and attempts to parse it # using a heuristic. # # require 'time' # # Time.parse("2010-10-31") #=> 2010-10-31 00:00:00 -0500 # # Any missing pieces of the date are inferred based on the current date. # # require 'time' # # # assuming the current date is "2011-10-31" # Time.parse("12:00") #=> 2011-10-31 12:00:00 -0500 # # We can change the date used to infer our missing elements by passing a second # object that responds to #mon, #day and #year, such as Date, Time or DateTime. # We can also use our own object. # # require 'time' # # class MyDate # attr_reader :mon, :day, :year # # def initialize(mon, day, year) # @mon, @day, @year = mon, day, year # end # end # # d = Date.parse("2010-10-28") # t = Time.parse("2010-10-29") # dt = DateTime.parse("2010-10-30") # md = MyDate.new(10,31,2010) # # Time.parse("12:00", d) #=> 2010-10-28 12:00:00 -0500 # Time.parse("12:00", t) #=> 2010-10-29 12:00:00 -0500 # Time.parse("12:00", dt) #=> 2010-10-30 12:00:00 -0500 # Time.parse("12:00", md) #=> 2010-10-31 12:00:00 -0500 # # If a block is given, the year described in +date+ is converted # by the block. This is specifically designed for handling two # digit years. For example, if you wanted to treat all two digit # years prior to 70 as the year 2000+ you could write this: # # require 'time' # # Time.parse("01-10-31") {|year| year + (year < 70 ? 2000 : 1900)} # #=> 2001-10-31 00:00:00 -0500 # Time.parse("70-10-31") {|year| year + (year < 70 ? 2000 : 1900)} # #=> 1970-10-31 00:00:00 -0500 # # If the upper components of the given time are broken or missing, they are # supplied with those of +now+. For the lower components, the minimum # values (1 or 0) are assumed if broken or missing. For example: # # require 'time' # # # Suppose it is "Thu Nov 29 14:33:20 2001" now and # # your time zone is EST which is GMT-5. # now = Time.parse("Thu Nov 29 14:33:20 2001") # Time.parse("16:30", now) #=> 2001-11-29 16:30:00 -0500 # Time.parse("7/23", now) #=> 2001-07-23 00:00:00 -0500 # Time.parse("Aug 31", now) #=> 2001-08-31 00:00:00 -0500 # Time.parse("Aug 2000", now) #=> 2000-08-01 00:00:00 -0500 # # Since there are numerous conflicts among locally defined time zone # abbreviations all over the world, this method is not intended to # understand all of them. For example, the abbreviation "CST" is # used variously as: # # -06:00 in America/Chicago, # -05:00 in America/Havana, # +08:00 in Asia/Harbin, # +09:30 in Australia/Darwin, # +10:30 in Australia/Adelaide, # etc. # # Based on this fact, this method only understands the time zone # abbreviations described in RFC 822 and the system time zone, in the # order named. (i.e. a definition in RFC 822 overrides the system # time zone definition.) The system time zone is taken from # <tt>Time.local(year, 1, 1).zone</tt> and # <tt>Time.local(year, 7, 1).zone</tt>. # If the extracted time zone abbreviation does not match any of them, # it is ignored and the given time is regarded as a local time. # # ArgumentError is raised if Date._parse cannot extract information from # +date+ or if the Time class cannot represent specified date. # # This method can be used as a fail-safe for other parsing methods as: # # Time.rfc2822(date) rescue Time.parse(date) # Time.httpdate(date) rescue Time.parse(date) # Time.xmlschema(date) rescue Time.parse(date) # # A failure of Time.parse should be checked, though. # # You must require 'time' to use this method. # def parse(date, now=self.now) comp = !block_given? d = Date._parse(date, comp) year = d[:year] year = yield(year) if year && !comp make_time(date, year, d[:yday], d[:mon], d[:mday], d[:hour], d[:min], d[:sec], d[:sec_fraction], d[:zone], now) end # # Works similar to +parse+ except that instead of using a # heuristic to detect the format of the input string, you provide # a second argument that describes the format of the string. # # If a block is given, the year described in +date+ is converted by the # block. For example: # # Time.strptime(...) {|y| y < 100 ? (y >= 69 ? y + 1900 : y + 2000) : y} # # Below is a list of the formatting options: # # %a :: The abbreviated weekday name ("Sun") # %A :: The full weekday name ("Sunday") # %b :: The abbreviated month name ("Jan") # %B :: The full month name ("January") # %c :: The preferred local date and time representation # %C :: Century (20 in 2009) # %d :: Day of the month (01..31) # %D :: Date (%m/%d/%y) # %e :: Day of the month, blank-padded ( 1..31) # %F :: Equivalent to %Y-%m-%d (the ISO 8601 date format) # %h :: Equivalent to %b # %H :: Hour of the day, 24-hour clock (00..23) # %I :: Hour of the day, 12-hour clock (01..12) # %j :: Day of the year (001..366) # %k :: hour, 24-hour clock, blank-padded ( 0..23) # %l :: hour, 12-hour clock, blank-padded ( 0..12) # %L :: Millisecond of the second (000..999) # %m :: Month of the year (01..12) # %M :: Minute of the hour (00..59) # %n :: Newline (\n) # %N :: Fractional seconds digits # %p :: Meridian indicator ("AM" or "PM") # %P :: Meridian indicator ("am" or "pm") # %Q :: Number of milliseconds since 1970-01-01 00:00:00 UTC. # %r :: time, 12-hour (same as %I:%M:%S %p) # %R :: time, 24-hour (%H:%M) # %s :: Number of seconds since 1970-01-01 00:00:00 UTC. # %S :: Second of the minute (00..60) # %t :: Tab character (\t) # %T :: time, 24-hour (%H:%M:%S) # %u :: Day of the week as a decimal, Monday being 1. (1..7) # %U :: Week number of the current year, starting with the first Sunday as # the first day of the first week (00..53) # %v :: VMS date (%e-%b-%Y) # %V :: Week number of year according to ISO 8601 (01..53) # %W :: Week number of the current year, starting with the first Monday # as the first day of the first week (00..53) # %w :: Day of the week (Sunday is 0, 0..6) # %x :: Preferred representation for the date alone, no time # %X :: Preferred representation for the time alone, no date # %y :: Year without a century (00..99) # %Y :: Year which may include century, if provided # %z :: Time zone as hour offset from UTC (e.g. +0900) # %Z :: Time zone name # %% :: Literal "%" character # %+ :: date(1) (%a %b %e %H:%M:%S %Z %Y) # # require 'time' # # Time.strptime("2000-10-31", "%Y-%m-%d") #=> 2000-10-31 00:00:00 -0500 # # You must require 'time' to use this method. # def strptime(date, format, now=self.now) d = Date._strptime(date, format) raise ArgumentError, "invalid date or strptime format - `#{date}' `#{format}'" unless d if seconds = d[:seconds] if sec_fraction = d[:sec_fraction] usec = sec_fraction * 1000000 usec *= -1 if seconds < 0 else usec = 0 end t = Time.at(seconds, usec) if zone = d[:zone] force_zone!(t, zone) end else year = d[:year] year = yield(year) if year && block_given? t = make_time(date, year, d[:yday], d[:mon], d[:mday], d[:hour], d[:min], d[:sec], d[:sec_fraction], d[:zone], now) end t end MonthValue = { # :nodoc: 'JAN' => 1, 'FEB' => 2, 'MAR' => 3, 'APR' => 4, 'MAY' => 5, 'JUN' => 6, 'JUL' => 7, 'AUG' => 8, 'SEP' => 9, 'OCT' =>10, 'NOV' =>11, 'DEC' =>12 } # # Parses +date+ as date-time defined by RFC 2822 and converts it to a Time # object. The format is identical to the date format defined by RFC 822 and # updated by RFC 1123. # # ArgumentError is raised if +date+ is not compliant with RFC 2822 # or if the Time class cannot represent specified date. # # See #rfc2822 for more information on this format. # # require 'time' # # Time.rfc2822("Wed, 05 Oct 2011 22:26:12 -0400") # #=> 2010-10-05 22:26:12 -0400 # # You must require 'time' to use this method. # def rfc2822(date) if /\A\s* (?:(?:Mon|Tue|Wed|Thu|Fri|Sat|Sun)\s*,\s*)? (\d{1,2})\s+ (Jan|Feb|Mar|Apr|May|Jun|Jul|Aug|Sep|Oct|Nov|Dec)\s+ (\d{2,})\s+ (\d{2})\s* :\s*(\d{2})\s* (?::\s*(\d{2}))?\s+ ([+-]\d{4}| UT|GMT|EST|EDT|CST|CDT|MST|MDT|PST|PDT|[A-IK-Z])/ix =~ date # Since RFC 2822 permit comments, the regexp has no right anchor. day = $1.to_i mon = MonthValue[$2.upcase] year = $3.to_i short_year_p = $3.length <= 3 hour = $4.to_i min = $5.to_i sec = $6 ? $6.to_i : 0 zone = $7 if short_year_p # following year completion is compliant with RFC 2822. year = if year < 50 2000 + year else 1900 + year end end off = zone_offset(zone) year, mon, day, hour, min, sec = apply_offset(year, mon, day, hour, min, sec, off) t = self.utc(year, mon, day, hour, min, sec) force_zone!(t, zone, off) t else raise ArgumentError.new("not RFC 2822 compliant date: #{date.inspect}") end end alias rfc822 rfc2822 # # Parses +date+ as an HTTP-date defined by RFC 2616 and converts it to a # Time object. # # ArgumentError is raised if +date+ is not compliant with RFC 2616 or if # the Time class cannot represent specified date. # # See #httpdate for more information on this format. # # require 'time' # # Time.httpdate("Thu, 06 Oct 2011 02:26:12 GMT") # #=> 2011-10-06 02:26:12 UTC # # You must require 'time' to use this method. # def httpdate(date) if date.match?(/\A\s* (?:Mon|Tue|Wed|Thu|Fri|Sat|Sun),\x20 (\d{2})\x20 (Jan|Feb|Mar|Apr|May|Jun|Jul|Aug|Sep|Oct|Nov|Dec)\x20 (\d{4})\x20 (\d{2}):(\d{2}):(\d{2})\x20 GMT \s*\z/ix) self.rfc2822(date).utc elsif /\A\s* (?:Monday|Tuesday|Wednesday|Thursday|Friday|Saturday|Sunday),\x20 (\d\d)-(Jan|Feb|Mar|Apr|May|Jun|Jul|Aug|Sep|Oct|Nov|Dec)-(\d\d)\x20 (\d\d):(\d\d):(\d\d)\x20 GMT \s*\z/ix =~ date year = $3.to_i if year < 50 year += 2000 else year += 1900 end self.utc(year, $2, $1.to_i, $4.to_i, $5.to_i, $6.to_i) elsif /\A\s* (?:Mon|Tue|Wed|Thu|Fri|Sat|Sun)\x20 (Jan|Feb|Mar|Apr|May|Jun|Jul|Aug|Sep|Oct|Nov|Dec)\x20 (\d\d|\x20\d)\x20 (\d\d):(\d\d):(\d\d)\x20 (\d{4}) \s*\z/ix =~ date self.utc($6.to_i, MonthValue[$1.upcase], $2.to_i, $3.to_i, $4.to_i, $5.to_i) else raise ArgumentError.new("not RFC 2616 compliant date: #{date.inspect}") end end # # Parses +date+ as a dateTime defined by the XML Schema and converts it to # a Time object. The format is a restricted version of the format defined # by ISO 8601. # # ArgumentError is raised if +date+ is not compliant with the format or if # the Time class cannot represent specified date. # # See #xmlschema for more information on this format. # # require 'time' # # Time.xmlschema("2011-10-05T22:26:12-04:00") # #=> 2011-10-05 22:26:12-04:00 # # You must require 'time' to use this method. # def xmlschema(date) if /\A\s* (-?\d+)-(\d\d)-(\d\d) T (\d\d):(\d\d):(\d\d) (\.\d+)? (Z|[+-]\d\d(?::?\d\d)?)? \s*\z/ix =~ date year = $1.to_i mon = $2.to_i day = $3.to_i hour = $4.to_i min = $5.to_i sec = $6.to_i usec = 0 if $7 usec = Rational($7) * 1000000 end if $8 zone = $8 off = zone_offset(zone) year, mon, day, hour, min, sec = apply_offset(year, mon, day, hour, min, sec, off) t = self.utc(year, mon, day, hour, min, sec, usec) force_zone!(t, zone, off) t else self.local(year, mon, day, hour, min, sec, usec) end else raise ArgumentError.new("invalid date: #{date.inspect}") end end alias iso8601 xmlschema end # class << self # # Returns a string which represents the time as date-time defined by RFC 2822: # # day-of-week, DD month-name CCYY hh:mm:ss zone # # where zone is [+-]hhmm. # # If +self+ is a UTC time, -0000 is used as zone. # # require 'time' # # t = Time.now # t.rfc2822 # => "Wed, 05 Oct 2011 22:26:12 -0400" # # You must require 'time' to use this method. # def rfc2822 sprintf('%s, %02d %s %0*d %02d:%02d:%02d ', RFC2822_DAY_NAME[wday], day, RFC2822_MONTH_NAME[mon-1], year < 0 ? 5 : 4, year, hour, min, sec) << if utc? '-0000' else off = utc_offset sign = off < 0 ? '-' : '+' sprintf('%s%02d%02d', sign, *(off.abs / 60).divmod(60)) end end alias rfc822 rfc2822 RFC2822_DAY_NAME = [ # :nodoc: 'Sun', 'Mon', 'Tue', 'Wed', 'Thu', 'Fri', 'Sat' ] RFC2822_MONTH_NAME = [ # :nodoc: 'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun', 'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec' ] # # Returns a string which represents the time as RFC 1123 date of HTTP-date # defined by RFC 2616: # # day-of-week, DD month-name CCYY hh:mm:ss GMT # # Note that the result is always UTC (GMT). # # require 'time' # # t = Time.now # t.httpdate # => "Thu, 06 Oct 2011 02:26:12 GMT" # # You must require 'time' to use this method. # def httpdate t = dup.utc sprintf('%s, %02d %s %0*d %02d:%02d:%02d GMT', RFC2822_DAY_NAME[t.wday], t.day, RFC2822_MONTH_NAME[t.mon-1], t.year < 0 ? 5 : 4, t.year, t.hour, t.min, t.sec) end # # Returns a string which represents the time as a dateTime defined by XML # Schema: # # CCYY-MM-DDThh:mm:ssTZD # CCYY-MM-DDThh:mm:ss.sssTZD # # where TZD is Z or [+-]hh:mm. # # If self is a UTC time, Z is used as TZD. [+-]hh:mm is used otherwise. # # +fractional_digits+ specifies a number of digits to use for fractional # seconds. Its default value is 0. # # require 'time' # # t = Time.now # t.iso8601 # => "2011-10-05T22:26:12-04:00" # # You must require 'time' to use this method. # def xmlschema(fraction_digits=0) fraction_digits = fraction_digits.to_i s = strftime("%FT%T") if fraction_digits > 0 s << strftime(".%#{fraction_digits}N") end s << (utc? ? 'Z' : strftime("%:z")) end alias iso8601 xmlschema end